This is due to the fact that the bulb requires constant power at all times to work properly. Our Dusk to Dawn bulbs are not compatible with any digital or mechanical timer. Note: The light sensor for the above bulb is located inside the bulb, right at its base.įrequently Asked Question Can a Dusk to Dawn bulb work with a digital or mechanical timer Take a black Sharpe pen and draw a thin line on the photo eye.Make sure the fixture is not connected to an external Photocell, Motion Sensor, or Timer.The photo-eye is picking up some type of reflection that is causing the bulb to flicker.Requires no seasonal adjustments, photo control activates with the absence of light. If the sensor is dirty it could cause the sensor to stay on. Woods Outdoor Dusk to Dawn Light Control, Black. Make sure the photo-eye is cleaned and clear of any dirt, fingerprints, or markings.Slightly lift up on the bulb while in the socket and move clockwise or counterclockwise. Make sure the sensor is facing toward the sun.Check to be sure the bulb's sensor (it may look like a black lens on the bulb) is getting enough sun to it.After you have determined the bulb is working remove the tape and clean off the photo-eye. In operation, photocontrol turns on the lights at dusk (time clock is already on) then the time clock turns them off at 3AM. Photocontrols need to be hot all the time. Set the time clock to come on during daylight and off at 3AM. Test the sensor to be sure it is operating correctlyĬover the sensor with a piece of electrical tape and see if it turns on like a normal light bulb. Put the time clock contacts AFTER the photocontrol in series with the red lead.If your light bulb is not going on or off as expected The embedded light sensor is designed to turn the light on and off. The bulb needs constant power to operate as expected. Note: Leave the switch on after the bulb is installed into a fixture. This article addresses frequently asked questions and provides tips that often help ensure the light bulb is turning on and off as expected. As a result, they operate a little differently than a regular light bulb. The light sensor will automatically turn the light bulb on when it is dark and off when it is light. Dusk to Dawn bulbs have a light sensor built into the bulb that monitors the ambient light.
0 Comments
Leave a Reply. |